Prolink PWH2004

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

These units have 32M RAM, 8M flash, a serial port with pins marked on circuit board (CMOS level!), 4+1 LAN ports, 1xUSB port and 802.11n WLAN. The device is apparently also sold as Abocom WR5205.

→ Install OpenWrt (generic explanation)

Please add the installation procedure here.

Firmware can be compiled from “trunk”:

choose Ralink RT288x/RT305x as target
and RT305x boards as subtarget.
Network interface needs boot option board=.... (WiP)
For WLAN, include rt2800-pci module under Wireless drivers.

The USB port does not appear to work yet (2010/09/12).

CPU	Ralink 3052, 384 MHz
Memory	32M
Flash	8M ¹⁾
LAN	4+1 ports
WLAN	802.11n
USB	1 port
Serial	pins marked on board, 57600 8N1, ttyS1
JTAG	present, needs soldering
power	12V DC

Description	memory area	size (in hex)
Bootloader (u-boot)	0x000000 - 0x030000	0x030000
Config	0x030000 - 0x040000	0x010000
Factory	0x040000 - 0x050000	0x010000
Kernel	0x050000 - 0x800000	0x7B0000

How to add tags

RT3052, 8Flash, 32RAM, 5port, FastEthernet, 1USB, USB2.0, 12v powered

¹⁾

some devices have 4MB, you should change the template inside ramips/image

rt3052 8Flash 32RAM 5port fastethernet 1usb usb2.0 12v powered

Prolink PWH2004

Supported Versions

Hardware Highlights

Installation

Compiling firmware

Hardware

Photos

Tags