Table of Contents

Alcatel-Sbell RG100A-AA

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported.
See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details.

Supported Versions

Hardware Highlights

Installation

→ Install OpenWrt (generic explanation)

FIXME Please add the installation procedure here.

Serial Port

J3 Pin 1 is left and angled corner.

Pin 1 +3.3 V
Pin 2 RX
Pin 3 GND
Pin 4 TX

Used a Nokia CA-42 datacable to connect, Default speed 115200,8N,1

Tags

How to add tags

, , ,